Dimensions And Clearances - Follett Maestro Plus MC 414A Series Installation, Operation And Service Manual

Dimensions and clearances

§ Entire front of ice machine must be clear of obstructions/connections to allow removal.
§ 12" (30.5 cm) clearance above ice machine for service.
§ 6" (15.3 cm) minimum clearance between exhaust side of ice machine and any adjacent equipment.
§ MCE414A and ER414A – 18" (45.7 cm) minimum, 10 ft (3 m) maximum clearance between discharge and air
intake grilles.
MCE414A_T
MFE414A_T
Front view — top mount
Side view — top mount
22.49" (57.1 cm)
Back view — top mount
15.22" (38.7 cm)
11.03" (28.0 cm)
8.03" (20.4 cm)
5.03" (12.8 cm)
2.34" (6 cm)
A – 3/4" MPT drain
B – 3/8" FPT water inlet
C – Electrical cord
6 MC_414A, MF_414A R290 230 V/50 Hz Ice Machines
21.29" (54.1 cm)
22.69" (57.6 cm)
22.46" (57.1 cm)
C
E
D
B
A
2.32"
(5.9 cm)
4.40" (11.2 cm)
D – 3/8" FPT condenser inlet
E – 3/8" FPT condenser drain
F – Bin signal connection (DO NOT APPLY VOLTAGE!)
MCE414A_S
ER414A
Front view — air-cooled
2.5" (6.4 cm)
18.88" (48 cm)
Side view — air-cooled
22.75" (57.8 cm)
20.75" (52.7 cm)
17.00"
(43.2 cm)
RIDE model air-cooled units only
C
F
B
4.81"
(12.0 cm)
A
2.31" (5.7 cm)