Table of Contents
Advertisement
OM20 Universal Outdoor Modem
BUC ADDRESS
BUC OUTPUT
FSK TEST
MN-OM20– Revision 5
CODAN:
Enables the FSK Communication link for CODAN BUCs only.
This feature enables the DMD20LBST to retrieve and display
certain BUC parameters on the front panel of the modem.
TERRASAT:
Enables the FSK communication link for Terrasat BUCs only.
This feature enables the DMD20LBST to retrieve and display
certain BUC parameters on the front panel of the modem.
AMPLUS:
Enables the FSK communication link for AMPLUS BUCs only.
This feature enables the DMD20LBST to retrieve and display
certain BUC parameters on the front panel of the modem.
{xxxx}
Allows the user to enter the BUCs address for FSK
communications. Modem may be able to retrieve address
through the FSK Query for Address Test menu.
{ENABLED, DISABLED}
Allows the modem to enable and disable the output of the BUC
via FSK command
{NONE/LOOPBACK/CYCLE TX ENABLE/QUERY FOR
ADDRESS/PASS THRU}
(Only available when the FSK Comm is Enabled)
NONE:
This is the none FSK operational mode.
LOOPBACK:
The FSK will initiate an internal loopback test of the FSK
transmitter and receiver verifying that the modem
communication link is functioning properly.
CYCLE TX ENABLE:
The modem will initiate a test of the FSK between the modem
and BUC. The LBST will enable and disable the BUC RF output
and verify that the commands are properly received and accepted
by the BUC and the modem. If communications are lost, LBST
will initiate a fault.
Web Browser/Remote Protocol
6–24
Advertisement
Table of Contents
