Calling And Answering; Placing A Call; Calling By Entering A Name Or Number - Polycom RealPresence Group 700 system User Manual

User's Guide for the Polycom RealPresence Group Series

Calling and Answering

Placing a Call

6
You can use your system to place a video call in any of the following ways:
• Entering a number or name on the
• Choosing a name from a recent call list or contact list:
— > Place a Call > Recent Calls
— > Place a Call > Contacts
• On the Home screen, choosing a Speed Dial entry. This option must be
configured by your administrator.

Calling by Entering a Name or Number

To place a call by entering a name or number:
1 To place a call, do one of the following using your remote control:
— Press .
— Navigate to
2 In the dialing field, enter the dialing information as follows:
Numbers: To enter numbers, select each number on the keypad with the
remote control or enter numbers on your remote control.
Letters: To enter letters, use your remote control to select each letter on the
onscreen keyboard. Or you can use the text-entry method commonly used
with cell phones to select letters directly on your remote control.
Backspace: To delete a number or letter, press
Depending on the capabilities of your system and the system you are
calling, the dialing information could look like one of these examples:
— 10.11.12.13 (IPv4 address—include the dots)
— 2555 (E.164 extension for H.323 or SIP)
— stereo.polycom.com (host name)
— user@domain.com (SIP)
> Place a Call > Keypad screen.
> Place a Call > Keypad.
on the remote control.
Polycom, Inc.