Getting Started; Introducing The Ht680; Notice - Unitech HT680 User Manual

Introducing the HT680

The HT680 is a rugged, compact and ergonomic handheld
terminal powered by the WinCE. NET OS to enhance your
work more efficient and profitable. It incorporates an integral
barcode scanning 1D laser/ 2D imager device, color LCD
with touch screen, keypad, BT and wireless communication
interface capability. It provides the user with a standard
Windows-based
operation.
The following HT680 Product Reference Guide provides
simple step-by-step procedures to give you hands-on
experience with your HT680. For programming your HT680,
please refer to our SKD and programming manual.

Notice

1. This unit is equipped with a battery pack and backup battery. It is possible
that the Unitech HT680 may not be powered ON due to battery discharge
as a result of storage. In the above situation and the first-time use, plug
the HT680 to the charging cable or charging cradle (with 5V/2A AC-DC
adapter), and charge the unused unit for over 16 hours in order to fully
charge its backup battery as well.
2. Under normal condition, the back-up battery will be charged from external
power or the main battery (if the main battery still has enough power to
turn on). If it is charged for the first time, the back-up battery will be fully
charged while main battery is charged fully.

Getting Started

environment for customization and
Chapter 1
1