Table of Contents
Advertisement
Performing a Hardware Reset
Perform a reset if MT380 freezes (i.e., device no longer responds to the buttons on the screen).
Performing a Warm Start
A Warm Start is used to reset or reboot the device without losing data stored in RAM. Perform a Warm
Start in any of the following situations:
•
MT380 fails to respond.
•
After installing software applications.
•
After making changes to certain system settings (i.e. SD card).
CAUTION!
Method 1: From Windows CE
1.
Tap
Programs
Mode.
2.
Tap Warm Boot.
Method 2: From Hardware
1.
Locate the function keys on MT380.
2.
Press F2 and F4 simultaneously.
28
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
A Warm Start will cause unsaved data to be lost.
Utilities
Boot-
F2
F4
Advertisement
Table of Contents
