Cpu; Backup; Battery - Unitech HT680 User Manual

CPU

This allows you to select the speed of the CPU according to your requirement
of the performance.
1. Select "Most Efficient". This will speed up the
CPU but very power consuming.
2. Select "Most Power Saving". This will save the
battery power but the efficiency is lower.
3. Select "Dynamic arrange". This will let the speed
changes according to the system status.
4. For every selection, please tap "Apply" button to
take the effect.

Backup

This tool allows you to save the current registry or reset to factory default.
1. Tap "Backup" tab.
2. Tap "Save" to save current registry settings.
3. Or tap "Restore" to reset registry to factory
default. The terminal will be warm started. (Note
that "Restore" button is grey out if the registry
setting was not saved before.)

Battery

This tool allows you to charge the battery in the Smart
Charge mode as soon as the power of battery
decreases to a level to which you drag. After changing
the charge mode, you are required to warm boot the
device. Whenever you charge the battery in the Smart
Charge mode, turn ON the device. The default charge
mode is Normal Charge.
59