Installing The Bpl4 Cage - Acer Altos G700 series User Manual
Hide thumbs
Also See for Altos G700 series:
- Rack installation instructions (14 pages) ,
- User manual (126 pages)
Table of Contents
Advertisement
46
Installing the BPL4 cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the SCSI backplane board:
a
SCSI cable
b
SCSI drive power cable
c
SCSI drive fault LED cable
3
Attach the other end of these cables to the corresponding
connectors on the mainboard.
Refer to "Mainboard layout" on page 14 for the location of the
connectors.
4
Insert the BPL4 cage into the housing (2), then tighten the four
thumbscrews to secure it to the chassis (1).
5
Reinstall the air baffle and the chassis panels.
3 Upgrading the system
Advertisement
Table of Contents
