Acer Altos G700 series User Manual page 100

90
Parameter
View Event
Logs
Event Control Interface
BIOS POST
Event Logging
ECC Event
Logging
PCI Device
Event Logging
AC Power
Lost/Recovery
Reset
Reduction
Memory
Description
Opens the system event log file for viewing
BIOS checks the bad processors and
memory modules during the POST
process. When this parameter is enabled,
it will make a log of this operation.
ECC (error correcting code) tests the
accuracy of data as it passes in and out of
memory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log.
PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit
extension for new processors, such as
Pentium processors. It can run at clock
speeds of 33 or 66 MHz. When this
parameter is enabled, any PCI device error
will be recorded in the event log.
When this parameter is enabled, any
instance of AC power lost will be
monitored and logged in the event log.
When this parameter is enabled, only the
the system's healthy memory size is
displayed during the POST process.
4 BIOS setup
Option
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
No
Yes