60
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots supports PCI (Peripheral Component Interconnect)
cards.
Note: The illustrations used in this section shows the Altos G700
server chassis.
To install an expansion card
1
Observe the ESD precautions and pre-installation procedures
described on page 37.
2
Locate an empty expansion slot on the mainboard.
3
Press the slot release latch outward (1).
4
Open the side cover of the slot (2).
5
Pull out the card bracket (3).
6
Remove the expansion card from its protective packaging.
7
Align the card in the empty bracket. Make sure that the card is
properly seated.
3 Upgrading the system