Installing Disk Drives And Hot-Swap Cage; 3.5-Inch Drive - Acer 500 System Manual

Installing Disk Drives and Hot-Swap Cage

Turn off the power switch and unplug the
power cord before installing or removing
diskette drives.

3.5-inch Drive

1. Open the front panel and remove the left panel of the housing.
See the Opening the Housing Panels section for more information.
2. Remove the screws attaching the 3.5-inch drive frame (2 pieces)
to the housing.
3. Secure a 3.5-inch drive on the drive frame with four screws as
shown below.
System Housing 1-7