Advertisement
General Care & Cleaning
Fig. 2
Removing
and Replacing
the Lift-Off
Oven
Door
The door is heavy. For safe, temporary
storage,
lay the door flat
with the inside of the door facing
down.
J
pull out.
Fig. 1
door
Hinge
Fig. 3
Roller
pin
Hinge
arm
hook
Hinge
arm
notch
, Slot bottom
Fig. 4
To Remove Oven Door:
1.
Open oven door completely
(horizontal
with floor
- See Fig. 1).
2.
Pull the door hinge locks on both left and right door hinges down from the oven
frame completely
towards
the oven door (See Fig. 2). A tool such as a small
flat-blade
screwdriver
may be required.
3.
Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle
- See Fig. 3).
4.
Close the door to about
a 10 degree angle
as shown in Fig. 3.
5.
With the oven door in this position,
lift the oven door hinge arms away from
the roller pins located
on each side of the oven frame
(See Fig. 4).
To Replace
Oven Door:
1.
Firmly grasp both sides of oven door along the door sides (Do not use the oven
door handle
- See Fig. 3).
2.
Holding
the oven door at the same angle as the removal
position,
seat the hook
of the hinge arm onto the roller pins located
on each side of the oven door
frame (See Fig. 4). Also, seat the notch of the hinge arm onto the bottom
of the
slot at the same time you seat the hook. The hook and notch of the hinge arms
must be fully seated onto the roller pins.
3.
Fully open the oven door (horizontal
with floor - See Fig. 1).
4.
Push the door hinge locks up towards
and into the oven frame on both left and
right oven door hinges (See Fig. 2) to the locked
position.
5.
Close the oven door.
Speclal
Door Care Instructlons
- Most oven doors contain glass that can break.
Read the following
recommendations:
1.
Do not close the oven door until all the oven racks are fully in place.
2.
Do not hit the glass with pots, pans, or any other object.
3.
Scratching,
hitting, jarring
or stressing the glass may weaken
its structure
causing an increased risk of breakage
at a later time.
Changing
the Halogen
Oven Light
The oven lights
will
automatically
turn ON when the oven door
is opened.
The
oven lights may also be manually
operated
by pressing
the _ pad.
The oven light bulb is covered
with a glass shield. The glass shield can be removed
to be cleaned
manually
or to change
oven light. THIS GLASS SHIELD MUST BE IN
PLACE WHENEVER
THE OVEN
IS IN USE.
To replace
the light bulb:
CAUTION:
BE SURE THE OVEN
IS COOL.
1.
Turn the power
off: at the main source.
2.
Wear
a leather-faced
glove for protection
against
possible
broken
glass.
3.
To remove the glass shield, lift up on side and use force to pull shield out.
4.
Replace
halogen
light appliance
bulb taking
care not to touch
the bulb with
your bare fingers.
Touching
bulb with your
skin can leave
a film on the bulb
that causes it to burn out quickly.
5.
Replace
glass shield in opposite
order and manner
of removal.
38
Advertisement
