Advertisement
Self-.Cleaning
To Start the Self-Clean
Cycle
Fbx
The FLEX CLEAN Cleon pad controls the Self-Cleaning
feature.
If you are
planning to use the oven directly
after a self-clean
cycle remember
to
allow time for the oven to cool down and the oven door to unlock. This
normally
takes about one hour. So a 3 hour self-clean
cycle will actually
take about 4 hours to complete.
*It is recommend
to use a 2 hour self-clean
cycle for light soils, a 3 hour
cycle for average
soils, and a 4 hour cycle for heavy
soils (to assure
satisfactory
results)
INSTRUCTIONS
_J__
To avoid
possible
burns use
care when opening
the oven door after the Self-
Cleaning
cycle.
Stand
to the side of the oven
when opening
the door to allow hot air or steam
to escape.
_J__
DO NOT force the oven door
open. This can damage the automatic
door locking
system. Use caution and avoid possible burns when
opening the door after the Self-Cleaning
cycle has
completed.
The oven may still be VERY HOT.
PRESS
DISPLAY
To start an immediate
Self-Cleanlng
cycle or to set a Delay
Start time
of 4:30
and
shut-off
automatically
(example
provided
is a default
3 hour
Self-Clean
Cycle)
1.
Be sure the clock is set with the correct
time of day and the oven
door is closed.
2.
Press
Lower
Oven
"
3.
Press FI ....
CLEAN" will flash and "3:00 HR" will show in the
Clean"
display
(Fig. 1). The control will automatically
clean for a 3 hour
period
(default
self-cleaning
cycle time). Note: If a 2 or 4 hour
clean time is desired,
press 2 0 0 for 2 hour or press
4 0 0 for a 4 hour clean time. Set the cleaning
time based on
the amount
of soil: lighh medium
or heavy (* See above).
4.
Press _.
The "DOOR LOCKED*' icon will flash; "CLEAN"
icon
and the letters "CLn" will remain on in the display
(Fig. 2).
5.
As soon as the control
is
set,
the motor
driven oven door lock will
begin to close automatically.
Once the door has been locked the
"DOOR
LOCKED"
indicator
light will stop flashing
and remain on.
Also, the oven icon will appear
in the display
(Fig. 3).
Note: Allow about
15 seconds for the oven door to lock.
Note:
If the optional
delay Self-Clean
feature
is desired, finish step
6-9. if Self-Clean
is started
immediately
skip the remaining
steps
and continue with _When
the Self-Clean
cycle is done" on the
following
page.
6.
Press Delay(Fig. 4). Enter the desired
start time using the number
Start
pads 430
(Fig. 5).
Z
Press Q.
"CLEAN",
"DELAY", "LOCI("
and "DOOR"
will be
displayed
(Fig. 6).
9.
The control
will start the self-cleaning
at the set start time, for the
period
of time previously
selected.
At that time, the icon "DELAY"
will go out.
Lower
Oven
Flex
Clean
200or
4OO
@
Delay
Start
43O
@
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
When the Self-Clean
Cycle
is Completed
1.
"HOT"
will appear
in the display. The time of day, the "DOOR
LOCKED"
and "CLEAN"
icon wiii remain
in the display.
2.
Once the oven has cooled
down for approximately
1 HOUR, and
the "DOOR
LOCKED"
icon is no longer displayed,
the oven door
can then be opened.
34
Advertisement
