Collect Materials And Tools; Record The Board's Serial Number; Make A Copy Of The Video Display Driver Diskette - Intergraph Intense 3D Pro 2200S Installation Manual

6

Collect Materials and Tools

Collect the following materials and tools:
u
One or more Intense 3D Pro 2200S boards.
u
Texture memory modules for Intense 3D Pro 2200S boards (if
needed).
u
Genloc cables with two, three, and four connectors (available in the
multi-screen cable kit, if installing multiple boards).
u
Diskette containing the Intense 3D Pro 2200S video display driver.
u
Flat-head or Phillips screwdriver, as required to prepare your
computer's PCI slots for installation of the option boards.
u
Monitor cable supplied with your computer or its monitor.
u
Your computer's documentation.
Retain all packaging materials. You must return your Intense 3D Pro
2200S hardware in its original packaging to obtain warranty service.

Record the Board's Serial Number

You must have the serial number of your Intense 3D Pro 2200S board
to get technical support or warranty service.
Before you install the Intense 3D Pro 2200S board in your computer,
record the serial number printed on the board here:
If you are installing multiple Intense 3D Pro 2200S boards, record the
serial number of each board before installation.
Make a Copy of the Video Display Driver
Diskette
Make a copy of the diskette containing the Intense 3D Pro 2200S video
display driver as a precaution. Should anything happen to the copy,
you will still have the original diskette.
See your computer's documentation to make a backup copy of the
video display driver diskette. Store the original video display driver