Table of Contents
Advertisement
Click Save and restart to send the new settings to the SCA. The SCA reboots automatically and
implements the new setup. Wait a few seconds before attempting to access the ethernet module
again.
7.4.2
ASSIGNING IP-ADDRESS THROUGH DHCP-SERVER.
Click on the Module Setup link and check the DHCP checkbox. The IP settings will then be
received from a DHCP server when the SCA is restarted. Click the Save and restart button to save
changes and restart the module.
The following message appears if the setup was successful:
Page 13 of 16
Hide quick links:
Advertisement
Table of Contents
