Table of Contents
Advertisement
Controlling the VP-725DS Presentation Switcher / Scaler
8
Controlling the VP-725DS Presentation Switcher / Scaler
You can control the Presentation Switcher / Scaler via:
The OSD Menu Screen (see section 8.1)
The front panel LCD Display (see section 8.2)
The infra-red remote control transmitter (see section 8.3)
ETHERNET (see section 8.4)
RS-232 remote control
8.1 Operating via the OSD MENU Screen
The OSD superimposes a menu on the screen from which you can control
your VP-725DS. When the OSD ON front panel button is selected, pressing
the MENU front panel OSD button or the MENU key on the infra-red remote
control transmitter (see Figure 44) displays the first OSD screen, the
"Brightness and Contrast" screen (see Figure 10).
If the OSD is locked
MENU key on the infra-red remote control transmitter (see Figure 44) will
not display the "Menu screen". In this case, you can navigate via the front
panel LCD.
After initially pressing the MENU front panel OSD button or the MENU key
on the infra-red remote control transmitter, each subsequent press moves to
the previous level in the OSD screen (Esc.).
1 Pressing the OSD ON front panel OSD button or the OSD key on the infra-red remote control transmitter (see Figure 44)
will block access to the OSD Menu
1
, pressing the MENU front panel OSD button or the
Figure 10: Controlling the Brightness and Contrast
19
Advertisement
Table of Contents
