STEP 2: Console
1.
Connect the Speed Adjustment Switch Cable (54) to the Speed Cable (Upper)(37). Connect the Incline
Adjustment Switch Cable (55) to the Incline Cable (Upper)(38). Connect the Computer Cable (Middle)(50)
and Computer Cable (Upper)(48).
2.
Insert Console Assembly (52) into right and left Uprights (4) and (5) and secure with four Button Head Socket
Bolts (133) and four Split Washers (113) using the M6 Allen Wrench (132). Now go back and completely
tighten the ten bolts inserted in Step 1 that join the upright tubes (4 & 5) to the frame base (2).
HARDWARE
#113. 3/8" x 2.0T
#133. 3/8" x 1-3/4"
Split Washer (4 pcs)
Button Head Socket
Bolt (4 pcs)
8
XT485
T readmill
STEP 3: Base Covers
1.
Attach the Frame Base Covers (Left - 61) and (Right - 62) to the Frame Base (2) with four
Tapping Screws (120) using the Phillips Head Screw Driver (148).
HARDWARE
#120. 5 x 16mm Self
Tapping Screw (4 pcs)
9
XT485
T readmill