Using the VP-4x8AK
3. Click OK.
The Device Properties window appears:
Figure 9: Device Properties Screen
4. If required, make changes and press Set. If not, click Close.
6.6
Control via the Ethernet Port
You can control the VP-4x8AK via RS-232/RS-485 or the Ethernet using the
Kramer K-Router application.
If you are controlling a standalone unit via RS-232 or the Ethernet, configure
the unit as master (Mach No. 1), see
Section
6.8.
17
Need help?
Do you have a question about the VP-4x8AK and is the answer not in the manual?