Billion BIPAC 5102 Series User Manual page 48

Select None to enter the time and date manually.
Time Server IP Address: Enter the IP address of your time server. Check with your
ISP/network administrator if you are unsure of this information.
Choose the time zone of your location. This will set the time difference
Time Zone:
between your time zone and Greenwich Mean Time (GMT).
Daylight Savings: Select this option if you use daylight savings time. Daylight saving is a
period from late spring to early fall when many countries set their clocks ahead of normal
local time by one hour to give more daytime light in the evening.
Start Date: Enter the month and day that your daylight-savings time starts on if you
selected Daylight Savings.
End Date: Enter the month and day that your daylight-savings time ends on if you
selected Daylight Savings.
Calibrate system clock with Time Server now: Click this button to have your Router
use the time server (that you configured above) to set its internal system clock.
Please wait for up to 60 seconds while the BIPAC 5102 Series locates the time server. If the
BIPAC 5102 Series cannot find the time server, please check the time server protocol and
its IP address. If the IP address was entered correctly, try pinging it for example to test the
connection.
Date
Current Date: This field displays the date of your BIPAC 5102 Series.
Each time you reload this page, the router synchronizes the time with the time server.
New Date (yyyy-mm-dd): This field displays the last updated date from the time
server.When you select None in the Use Time Server when Bootup field, enter the new
date in this field and then click Apply.
Time
Current Time: This field displays the time of your router. Each time you reload this page,
the BIPAC 5102 Series synchronizes the time with the time server.
New Time: This field displays the last updated time from the time server.
When you select None in the Use Time Server when Bootup field, enter the new time in
this field and then click Apply.
46