Lan - Billion BIPAC 5102 Series User Manual

4.2.2 LAN

Click LAN to open the following screen.
DHCP:
If set to Server, your BIPAC 5102 Series can assign IP addresses, an IP default gateway
and DNS servers to Windows 95, Windows NT and other systems that support the DHCP
client.
If set to None, the DHCP server will be disabled.
If set to Relay, the BIPAC 5102 Series acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP address of
the actual, remote DHCP server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set
Client IP Pool Starting Address: This field specifies the first of the contiguous addresses
in the IP address pool.
Size of Client IP Pool: This field specifies the size or count of the IP address pool.
Primary DNS Server: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
Remote DHCP Server: If Relay is selected in the DHCP field above then enter the IP
30