Billion BIPAC 5102 Series User Manual page 35

(802.11g) adsl modem/router

Hide thumbs Also See for BIPAC 5102 Series:

Table of Contents

4.2.3.1 Half Bridge

Name: Enter the name of your Internet Service Provider

Mode: Select Routing (default) or Bridge

Encapsulation: select Bridge in the Mode field, select either PPPoA or RFC 1483.

select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE.

Multiplex: Select the method of multiplexing used by your ISP. Choices are VC or LLC.

Virtual Circuit ID: VPI and VCI define a virtual circuit.

VPI: The valid range for the VPI is 0 to 255

VCI: The valid range for the VCI is 32 to 65535

ATM QoS Type: Select CBR to specify fixed (always-on) bandwidth for voice or data

traffic. Select UBR for applications that are non-time sensitive, such as e-mail. Select VBR

for burst traffic and bandwidth sharing with other applications.

Table of Contents