Turning Off; Changing Brightness & Contrast; Selecting The Language; External Connections - AvMap EKP-IV User Manual

The electronic charts are not intended to substitute for the official charts. Press
'ENTER' to open the Moving Map screen.

2.2.2 TURNING OFF

'POWER' 3 sec.: a countdown timer appears on the screen, if you release the
key before the countdown timer reaches zero, the EKP-IV will remain On.
2.3 CHANGING BRIGHTNESS & CONTRAST
Press and immediately release 'POWER' to adjust the brightness and the con-
trast of the display and keyboard (do not press and hold the key or the "power-
off " message will be displayed!).
To increase/decrease the brightness use respectively up/down cursor key. Simi-
larly, to increase/decrease the contrast use left/right cursor key.
Use 'PAGE' to choose Normal Palette and 'MENU' to choose Night palette.
In addition the Time and the GPS State are shown.

2.4 SELECTING THE LANGUAGE

It is possible to select the language in which the information is displayed (for
screen labels, menus and options, but it does not affect the map information).
The default setting is English.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" + 'ENTER' + "LANGUAGE"
+ 'ENTER'
Choose the language you want and press 'ENTER' again to confirm.

2.5 EXTERNAL CONNECTIONS

2.5.1 INTERNAL/EXTERNAL GPS SOURCE

The EKP-IV has an internal GPS Receiver. Be sure the Fix Source is set to
Internal GPS to receive data from this internal receiver.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "FIX SETUP" + 'ENTER' + "FIX SOURCE" +
'ENTER'
Choose Internal GPS and press 'ENTER' to confirm.
Otherwise if the EKP-IV is using an external NMEA0183 positioning source, set
the Fix Source as External NMEA0183. The recognized Input NMEA0183 mes-
sages are the following: GGA, GLL, GSA, GSV, HDG, HDM, HDT, PCMPA,
RMC, VHW, VTG (see Appendix F for more details on NMEA sentences).
User Manual 21