Elapsed Timer; Trip Computer - AvMap EKP-IV User Manual

A box will appear in the right hand column allowing you to set the hours,
minutes and seconds. Using the cursor key select the number desired and press
'ENTER' to accept and begin the countdown. Entering 00:00:00 equals Off.
The default setting is Off (00:00:00).

10.2 ELAPSED TIMER

The Elapsed Timer will begin calculating time from zero when activated. The
elapsed time will continue to calculate in the background of the software, even
if you are not on the Calculator screen or do not display the timer data in the
data fields window.
The system does require a GPS fix to begin the timer, as the calculation of time
is based on the GPS data. If the GPS fix is lost during this mode, the timer will
display dashes in the right hand column. The time calculation will continue to
work in the background.
> 'MENU' 1 sec. + "CALCULATOR" + 'ENTER' + "ELAPSED TIMER" + 'ENTER'
This will begin the timer. To turn Off the timer, press 'ENTER' from this
menu. A warning box will appear on screen to confirm your action. Press
'ENTER' to confirm or 'CLEAR' to quit and continue the timer calculation.
The default setting is Off (00:00:00).

10.3 TRIP COMPUTER

The EKP-IV provides a calculation page which tracks speed, flying time, and
distance traveled.
This data is statistical in nature and is calculated based on GPS parameters.
NOTE
The Fuel Calculator "Starting Fuel" entry will reset the partial trip data.
To select the Trip Computer page:
> 'MENU' 1 sec. + "CALCULATOR" + 'ENTER' + "TRIP COMPUTER" + 'ENTER'
66 User Manual