Alarm Set-Up; Arrival Alarm Radius; Xte Alarm Range; Waypoint Alarm Radius - AvMap EKP-IV User Manual

displaying the position fix in Track-up, the setting selected here will enable the
heading to vary +/- the degree selected before the map is redrawn. A higher
number here will result in less redraw time.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "FIX SETUP" + 'ENTER' + "HEAD UP RE-
SPONSE" + 'ENTER'
Setting options are: +/-5, +/-10, +/-15, +/-45, +/-90. The default setting is
+/-15.

14.3 ALARM SET-UP

The EKP-IV provides alarm settings for various functions. Here you can set
the system for your navigational requirements.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "ALARM SETUP" + 'ENTER'

14.3.1 ARRIVAL ALARM RADIUS

Specifies the radius of a circle around the Waypoint of a Route: when your
aircraft reaches a point within this circle an alarm sounds and the Waypoint
Arrival box appears on screen. To set this alarm:
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "ALARM SETUP" + 'ENTER' + "ARRIVAL ALARM
RADIUS" + 'ENTER'
After pressing 'ENTER' a box will appear with 00.00. Using the cursor key
select the number desired and press 'ENTER'. The default setting is Off (00.00).

14.3.2 XTE ALARM RANGE

Specifies the distance your Cross Track Error (XTE) can vary before the sound
of an alarm.
To set this alarm:
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "ALARM SETUP" + 'ENTER' + "XTE ALARM
RANGE" + 'ENTER'
After pressing 'ENTER' a box will appear with 00. Using the cursor key select
the number desired and press 'ENTER'. The default setting is Off (00).

14.3.3 WAYPOINT ALARM RADIUS

Specifies the radius of a circle around the User Waypoint: when your aircraft
reaches a point within this circle an alarm sounds and the Waypoint Alarm
box apprears on the screen.
Note:
The alarm is only active for User Waypoints with this symbol selected
for the icon: "alarm logo".
To set the alarm:
> 'MENU' 1 sec + 'MENU' + "ALARM SETUP" + 'ENTER' + "AIRSPACE AHEAD ALARM" + 'ENTER'
After pressing 'ENTER' a box will appear with 00.00. Using the cursor key,
82 User Manual