Preload Password; Check The Phone's Ip; How To Set The Ip Address Through Keypad; 6Th、 Web Settings - ATCOM AT-610 User Manual

AT-610 User Manual
12 12 12 12、
Click to Click Click Click to to to dial dial dial dial
When User A accesses web interface and calls User B via clicking one link
which is direct to B, IP Phone of User A would ring. Then call B automatically
once User A picking up handset.
13 13 13 13、
Preload Preload Password Password
Preload

Preload Password

Password
There are 2 models to set the authority of web accessing and command line:
Guest model and Admin model. User could view and configure all items in Admin
model. While user couldn't change the SIP (1-2) and IAX2 configuration as well
as server address and port but only access and view the information. User would
enter different model after input different user name and password:
� Guest Model
� Username：guest
� Password： guest
�
Admin Model：
� Username：admin
� Password： admin
14 14 14 14、
Check Check the the
Check Check the the Phone
Press "Info" several times to check the IP.
15 15 15 15、
How to set
How How to How to set to set set the
Regarding AT610 setting Network mode to Static via keypad as below:
Long press "1" after LCD display "Static mode change..." on this time, IP phone
is default IP address as 192.168.1.179.
If you need to change Static IP address, please refer as below:
� press "Menu/enter" button and input password as " 123"
� press "Menu/enter" button that LCD display Network
� Still press enter button until LCD display current static IP address
� press "delete" button that LCD display "input value"
� Input the IP address as you need and press enter after finished input IP
address, IP phone will saving the configuration auto after 30 seconds.
� Long press "1" for Static
� Long press "2" for DHCP
� Long press "3" for PPPoE
ATCOM TECHNOLOGY CO., LIMITED
Phone' ' ' ' s s s s IP Phone Phone IP IP
IP
the IP address through
the the IP IP IP address address through address through Keypad through
Keypad
Keypad Keypad