Layering The Digital Sound With The Acoustic Piano Sound; (Layer Mode); Ta3 Sh3 Sc3 - Yamaha TransAcoustic TA3 Owner's Manual

5
While playing the keyboard, adjust the volume level by rotating the [VOLUME] control.
Decreases the level.

Layering the digital sound with the acoustic piano sound

(Layer mode)

TA3 SH3 SC3
With the Layer mode, you can play a digital sound layered over the acoustic piano sound. To enable the Layer mode,
generally follow the steps of TransAcoustic mode on page 20, but make sure to turn on the acoustic piano sound in step 3
as shown below. Also, make sure a Voice other than "---" is selected (page 22).
3
 For pianos with a silencing lever or silencing pedal:
Return the silencing lever or the silencing pedal back to the Acoustic mode position (page 17).
 For grand pianos without a silencing lever:
Press the [VOLUME] control to turn the [Aco.] lamp on.
NOTE
• This instrument is expertly tuned before it is shipped. However, the pitch may gradually go out of tune, depending on circumstances
such as temperature and humidity. When you detect a difference between the pitch of the digital sound and acoustic piano sound, tune
the piano mechanism, or adjust the Master Tune for the digital sound in the Function F3.4 (page 47). For tuning, consult a professional
piano technician.
• The volume of the acoustic piano sound cannot be adjusted by using the [VOLUME] control.
Increases the level.
TA3 SH3 SC3 Owner's Manual
2
21