Installing The Usb Driver; Specifying The Sampling Rate - Roland R-26 Owner's Manual

Connecting to Your Computer via USB

Installing the USB Driver

In order to use the R-26's AUDIO I/F mode,
you must first install the USB driver in your
computer.
1.
Install the USB driver in your
computer .
The R-26's dedicated driver is provided on
the included SD card.
It can also be downloaded from the Roland
website.
Roland website
http://www.roland.com/
Refer to the Roland website for details on
the operating requirements. The program
and procedure for installing the driver will
differ depending on your system. Carefully
read the Readme.htm file included with the
downloaded file.
90
Specifying the Sampling
Rate
Select the sampling rate that's appropriate
for the way you'll be using the recorded
data. If you're recording into software on
your computer, specify a sampling rate that
your software can handle.
1.
Choose [MENU]
F> <SAMPLE RATE> .
Ú
<AUDIO I/
Ú