Roland R-26 Owner's Manual page 96

Settings for the R-26
Category
PLAY SETUP
INPUT SETUP
96
Menu item / Effect
PLAY MODE
Specifies the order in which files will play (p. 62),
REPEAT
Specifies whether Repeat will be enabled (p. 98)
LIMITER
Turns the limiter on/off.
LCF SW
INT MIC
Turns the low-cut filter on/off.
(p . 36)
LCF CUTOFF
Specifies the frequency of the
low-cut filter.
INPUT TYPE
Specifies the external input type.
INPUT1 PHANTOM
Specifies whether phantom power
will be supplied to the ANALOG IN
1/L jack.
INPUT1 LIMITER
Turns the limiter on/off.
INPUT1 LCF SW
Turns the low-cut filter on/off.
INPUT2 PHANTOM
Specifies whether phantom power
ANALOG
will be supplied to the ANALOG IN
IN (p . 38)
2/R jack.
*1
INPUT2 LIMITER
*2
Turns the limiter on/off.
INPUT2 LCF SW
Turns the low-cut filter on/off.
LCF CUTOFF
Specifies the frequency of the
low-cut filter.
MS-MIC WIDTH
Adjusts the width of the sound.
MONITOR TYPE
Selects the type of sound when
monitoring the input from the
ANALOG IN 1/L jack, 2/R jack.
Value (default value: bold)
SINGLE , SEQUENTIAL , SHUFFLE
OFF, ON
OFF, ON
OFF, ON
100 Hz, 200 Hz, 400 Hz
SEPARATE, LINK, MS-MIC
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
OFF, ON
100 Hz, 200 Hz, 400 Hz
0–5–10
STEREO, MONO