Error Messages - Roland R-26 Owner's Manual

Error Messages

This section explains the error messages that may appear in the display.
Message
Clock Initialized
Battery Low
Improper Song
Already Exists
Song Protected
Name Too Long
File System Error
SD Card Unformatted
SD Card Full
Cannot Change Name
File Size Over 2 GB
SD Card Slow
SD Card Locked
SD Card Error
Root Folder Full
Folder is not empty
No Card
HOLD is ON
Now Recording
Now Playing
100
Problem
Power for the internal clock was lost, so the internal clock has been
initialized. Please specify the date and time.
The batteries or the external power supply have run low. Please
replace the batteries or use an AC adaptor.
This file is of a format that the R-26 cannot use.
An identically named file or folder exists. Please use a different name
to create the file or folder.
The file is protected. Turn Write Protect OFF before you execute the
operation.
The name is too long. Shorten the name of the file.
There is a problem with the SD card. Format the SD card on the R-26.
The SD card has not been formatted. Format the SD card on the
R-26.
The SD card has insufficient free space. Free up space on the card by
copying files to your personal computer and making backups, or by
erasing files, or by formatting the card.
The file cannot be renamed because the file name contains
double-byte characters.
The file contains too much data.
Writing to the SD card could not be performed fast enough. Please
use an SD card that is known to work with the R-26. In some cases,
repeated writing and deleting of files may cause the files to become
fragmented on the SD card, impairing the processing capability. If
so, please reformat the SD card.
The SD card is locked. Remove the SD card and turn off the Lock
setting.
A problem occurred while accessing the SD card. The SD card might
be damaged.
The root folder is full. Erase files or move them to a different location.
The folder already contains file(s). Try the procedure again after the
files in the folder have been erased.
No SD card is inserted. Insert an SD card into the R-26.
The operation is not possible because the [HOLD] switch is on. Turn
the [HOLD] switch off if you want to perform an operation.
Currently recording. Stop recording if you want to perform an
operation.
Currently playing. Stop playback if you want to perform an
operation.