Roland R-26 Owner's Manual page 88

Connecting to Your Computer via USB
Mac OS
1.
Drag "NO NAME" into the trash in the
dock .
When you drag to the location of the trash
at the right edge of the dock, the trash can
will change to
connection.
2.
Stop the connection .
When the "NO NAME" or "Unnamed" icon
disappears from the desktop, you can
disconnect the USB cable that's between
the R-26 and your computer. Alternatively,
you can switch off the R-26's power.
* While under most conditions, a
computer similar to the above will
permit normal operation of the R-26,
Roland cannot guarantee compatibility
solely on these factors. This is due to
numerous variables that may influence
the processing environment, such as
differences in motherboard design and
the particular combination of other
devices involved.
88
, allowing you to stop the