Correct Baffle And Blanket Placement - Quadra-Fire 5100I-GD-B Owner's Manual

5100-i act wood insert advanced combustion technology (act)
Hide thumbs Also See for Quadra-Fire 5100I-GD-B:
Table of Contents

Advertisement

H. Correct Baffle & Blanket Placement
WARNING
Fire Risk
Firebox damage due to improper baffle place-
ment is not covered by warranty. Operate the
wood burning appliance with the baffle in the
correct position only.
Not doing so could result in:
• Reduced efficiency
• Overheating the chimney
• Overheating the rear of the firebox
• Poor performance
Ensure correct baffle placement and replace baffle com-
ponents if damaged or missing.
CORRECT POSITION
Ceramic Blanket
Baffle Board
Ceramic Blanket and Baffle Board MUST be in
contact with the back of the firebox and even with
each other in the front.
Figure 29.1
September 1, 2008
5100-I ACT WOOD INSERT
Back of Firebox
438-0380D
INCORRECT POSITIONS
Ceramic Blanket and Baffle Board are NOT in
contact with the back of the firebox.
Ceramic Blanket is NOT in contact with the
back of the firebox and NOT even with the Baf-
fle Board in the front.
Ceramic Blanket
Baffle Board
Ceramic Blanket is bunched up at the back of
the firebox and NOT even with the Baffle Board
in the front.
Figure 29.2
R
Back of Firebox
Page 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5100i-nl-b

Table of Contents