Quadra-Fire 5700 Series Owner's Manual

Quadra-Fire 5700 Series Owner's Manual

Step top wood appliance automatic combustion control (acc)
Hide thumbs Also See for 5700 Series:

Advertisement

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions on installation, operation, or service.
NOTICE: DO NOT DISCARD THIS MANUAL
5700 STEP TOP WOOD APPLIANCE
SERIES AUTOMATIC COMBUSTION
CONTROL (ACC)
MODEL NUMBER:
57ST-ACC-C
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recommends
HHT Factory Trained or NFI certified professionals.
1
Owner's Manual
Operation & Care
R
7038-227L
WARNING
If the information in these instructions is
not followed exactly, a fire could result
causing property damage, personal injury,
or death.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
Do not over-fire - If appliance or chimney connector
glows, you are over-firing. Over-firing will void
your warranty.
Comply with all minimum clearances to combustibles
as specified.
Failure to comply may cause house fire.
WARNING
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass and appliance will cause burns.
Do not touch glass until it is cooled
Use leather gloves when reloading fuel
NEVER allow children to touch glass
Keep children away
CAREFULLY SUPERVISE children in same room
as appliance.
Alert children and adults to hazards of
high temperatures
High temperatures may ignite clothing or other
flammable materials.
Keep clothing, furniture, draperies and other
flammable materials away.
WARNING
Fire Risk.
For use with solid wood fuel only.
Other fuels may over-fire and generate
poisonous gases (i.e. carbon monoxide).
NOTE: To obtain a French translation of this manual,
please contact your dealer or visit www.quadrafire.com
REMARQUE : Pour obtenir une traduction française de
ce manuel, s'il vous plaît contacter votre revendeur ou
visitez www.quadrafire.com
08/23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5700 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Quadra-Fire 5700 Series

  • Page 1 Owner’s Manual Operation & Care INSTALLER: Leave this manual with party responsible for use and operation. OWNER: Retain this manual for future reference. Contact your dealer with questions on installation, operation, or service. WARNING NOTICE: DO NOT DISCARD THIS MANUAL If the information in these instructions is not followed exactly, a fire could result causing property damage, personal injury,...
  • Page 2: Sample Of Serial Number / Safety Label

    Welcome to the Quadra-Fire Family NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction A. Sample of Serial Number / Safety Label LOCATION: Back of appliance ITEM PART NUMBER PART NAME 7038-228 SERIAL RATING PLATE HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN AND CLOTHING AWAY.
  • Page 3: Table Of Contents

    C. General Maintenance......17 D. Correct Baffle & Blanket Placement....19 Quadra-Fire is a registered trademark of Hearth & Home Technologies. 7038-227L...
  • Page 4: Warranty Policy

    B. Warranty Policy Hearth & Home Technologies LLC LIMITED LIFETIME WARRANTY Hearth & Home Technologies LLC (“HHT”) extends the following warranty for HHT gas, wood, pellet and electric hearth appliances (each a “Product” and collectively, the “Product(s)”) and certain component parts set forth in the table below (“Component Part(s)”) that are purchased from a HHT authorized dealer or distributor.
  • Page 5 WARRANTY CONDITIONS: • Because HHT cannot control the quality of any Products sold by unauthorized sellers, this Warranty only covers Products that are purchased through an HHT authorized dealer or distributor unless otherwise prohibited by law; a list of HHT authorized dealers is available on the HHT branded websites.
  • Page 6: Quick Start Guide

    C. Quick Start Guide NOTE: These are generic drawings and may not represent your specifi c model. 10 Pieces of Newspaper, 10-20 Pieces of Dry ITEMS NEEDED FOR FIRST FIRE: Kindling and Few Pieces of Dry Split Wood. OPEN AIR CONTROLS LOAD WOOD ADD NEWSPAPER...
  • Page 7: Listing And Code Approvals

    Listing and Code Approvals A. Appliance Safety Certification C. BTU & Efficiency Specifications Model Number: 57ST-ACC-C EPA Certification Number: 99-17 Number: Laboratory: OMNI Test Laboratories, Inc. EPA Certified Emissions: 1.8 grams per hour Report Number: 0061WS092S *LHV Tested Efficiency: 80.0% Listed Room Appliance, Solid Type: **HHV Tested Efficiency: 74.0%...
  • Page 8: Glass Specifications

    D. Glass Specifications WARNING This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please contact your dealer for replacement glass. Fire Risk. Hearth & Home Technologies disclaims any E. Mobile Home Approved (USA only) responsibility for, and the warranty will be •...
  • Page 9: Operating Instructions

    • Burn trash or large amounts of scrap lumber has been placed on the burning of wood for home heating. • Permit too much air to the fire In order to improve the situation, we at Quadra-Fire have developed cleaner-burning wood appliances that Visit www.quadrafire.com/shopping-tools/videos...
  • Page 10: Burn Rates And Operating Efficiency

    It is very important to reload your appliance while 2. Medium low burn setting: enough lively hot coals remain in order to provide the - Burn Rate Air Control spring handle up to high position amount of heat needed to dry and rekindle the next load for 5 minutes.
  • Page 11 WARNING CAUTION Risk of Fire. When set on High Burn Rate and over-riding Injury Risk. the Automatic Combustion Control system an • Gloves recommended over fire situation can occur and may result in a chimney fire. Over firing will void the appliance warranty. Manual Timer Over-Ride: If you need to shut the ACC system off before it goes through the cycle of shutting itself off;...
  • Page 12: Building A Fire

    E. Building A Fire NOTE: Before lighting your first fire in the appliance: • Build fire on brick firebox floor. • Do NOT use grates, andirons or other methods to NOTE: The special high temperature paint that your support fuel. It will adversely affect emissions. appliance is finished with will cure as your appliance heats.
  • Page 13: Blower Operating Instructions

    G. Opacity (Smoke) This is the measure of how cleanly your appliance is burning. NOTE: If your Quadra-Fire wood appliance is equipped Opacity is measured in percent; 100% opacity is when an with an optional blower, you should follow these...
  • Page 14: Clear Space

    H. Clear Space I. Negative Pressure NOTE: Do NOT place combustible objects within WARNING 4 ft (1.2m) of the front of appliance (Figure 14.1). Asphyxiation Risk. • Mantel: Avoid placing candles and other heat-sensitive • Negative pressure can cause spillage objects on mantel or hearth.
  • Page 15: Frequently Asked Questions

    J. Frequently Asked Questions ISSUES SOLUTIONS When first operated, this appliance may release an odor for the first several hours. This is Odor from appliance caused by the curing of the paint and the burning off of any oils remaining from manufacturing. Noise is caused by metal expanding and contracting as it heats up and cools down, similar to Metallic noise the sound produced by a furnace or heating duct.
  • Page 16: Maintenance And Service

    Maintenance and Service A. Quick Reference Maintenance Guide CAUTION When properly maintained, your fireplace will give you many years of trouble-free service. Contact your Allow the appliance to completely cool down before dealer to answer questions regarding proper operation, performing any cleaning or maintenance. Start the troubleshooting and service for your appliance.
  • Page 17: Cleaning And Operating The Ash Removal System

    B. Cleaning and Operating the Ash Removal System WARNING Fire Risk. Make sure Ash Removal System door is sealed tight against the gasket. Air leakage may cause: • Over-fire condition • Flame and/or smoke spillage • Wood to burn too fast Do NOT use Ash Removal System while stove Figure 17.1 is burning.
  • Page 18 Formation and Need For Removal: 3. Disposal of Ashes When wood is burned slowly, it produces tar and other • Frequency: When ash is within 1-3/4 in. (44mm) of organic vapors which combine with expelled moisture firebox lip • By: Homeowner to form creosote.
  • Page 19: Correct Baffle & Blanket Placement

    INCORRECT POSITIONS D. Correct Baffle & Blanket Placement WARNING Fire Risk. Firebox damage due to improper baffle placement is not covered by warranty. Operate the wood burning appliance with the baffle in the correct position only. Not doing so could result in: •...
  • Page 20: Troubleshooting Guide

    Troubleshooting Guide With proper installation, operation, and maintenance your wood appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist you or a qualified service person in the diagnosis of a problem and the corrective action to be taken. Start Fire Problems Possible Cause Solution...
  • Page 21: Service Part Replacement

    NOTE: DO NOT OVER TIGHTEN - can cause glass to break. 9. Replace the door on the appliance. Quadra-Fire appliances are equipped with ceramic super heat-resistant glass, which can only be broken by impact or misuse. WARNING Injury Risk.
  • Page 22: Snap Disc Replacement

    C. Snap Disc Replacement Service Part: SRV230-0470 1. Locate the snap disc bracket assembly at the bottom left rear corner of the appliance. 2. A magnet holds the bracket to the appliance. Pull the bracket down away from the appliance to expose the snap disc.
  • Page 23: Door Handle Assembly

    E. Door Handle Assembly F. Tube Channel Assembly Replacement Service Parts: SRV7033-071 Service Part: SRV7038-008 Removing Tube Channel Assembly 1. Slide door handle through door. 1. Remove the right side shield by removing three (3) 2. Install additional washer(s) as shown in Figure 23.1 3.
  • Page 24: Reference Materials

    Reference Materials A. Service & Maintenance Log Date of Service Performed By Description of Service 7038-227L 08/23...
  • Page 25 Date of Service Performed By Description of Service 7038-227L 08/23...
  • Page 26 B. Service Parts List 57ST-ACC-C Service Parts Beginning Manufacturing Date: Sept 2017 Step Top Wood Stove Ending Manufacturing Date: Active Advanced Combustion Control Part number list on following page. 08/23 7038-227L 08/23...
  • Page 27: Service Parts

    5 Ft. 832-0460 13.4 Glass Frame Set 4 pcs. GLA-FRM-5700 13.5 Screw Flat Head Phillips 8-32 x 1/2 Pkg of 12 220-0490/12 Logo, Quadra-Fire Pkg of 10 7000-694/10 Door Handle Assembly SRV7033-071 14.1 Fiber Handle SRV7060-212 14.2 Door Handle SRV7044-188 14.3...
  • Page 28 57ST-ACC-C Service Parts Beginning Manufacturing Date: Sept 2017 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor. . Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 29 57ST-ACC-C Service Parts Beginning Manufacturing Date: Sept 2017 Ending Manufacturing Date: Active #24 Burn Rate Control & #25 Pedestal Assembly Associated Parts 25.1 25.2 24.9 25.3 24.8 24.1 25.4 25.5 24.7 24.6 25.6 24.2 24.5 25.7 25.9 25.8 24.4 24.3 IMPORTANT: THIS IS DATED INFORMATION .
  • Page 30 57ST-ACC-C Service Parts Beginning Manufacturing Date: Sept 2017 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor. . Provide model number and serial number when requesting service parts from your dealer or distributor.
  • Page 31 D. Accessories 57ST-ACC-C Service Parts Beginning Manufacturing Date: Sept 2017 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor. .
  • Page 32 Hearth & Home Technologies 352 Mountain House Road Halifax, PA 17032 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer log onto www.quadrafi re.com CAUTION DO NOT DISCARD THIS MANUAL •...

This manual is also suitable for:

57st-acc-c

Table of Contents

Save PDF