Manual Code Search - Radio Shack 15-310 User Manual

Manual Code Search

Manual Code Search sends codes to the device you want
to control one by one at the touch of the G button.
1. Power on the device that you want to control. For
VCRs and DVD players, you must insert a tape or
disc.
2. On the universal remote, press and hold SET, then
press a device key (TV, VCR/DVD or STB/CBL). The
red LED lights up and stays lit, indicating the remote
is in setting mode. Release both buttons.
n
Note: Do not hold down the keys for longer
than three seconds or the remote enters auto search
mode.
3. Press G on the universal remote. The universal
remote enters manual code search mode and the
red LED flashes.
4. Press G repeatedly on your universal remote until
the device turns off. (Each press of the G key sends
a different code to your device.)
When the device turns off, the code is correct. Press
the device key on your universal remote within 10
seconds to confirm the code.
5. Press G on your universal remote to turn your device
back on.
8