Table of Contents
Related Manuals for Radio Shack 15-303
Summary of Contents for Radio Shack 15-303
- Page 1 15-303 User’s Guide Satellite/Cable Universal Remote Control Thank you for purchasing your Satellite/Cable Universal Remote Control from RadioShack. Please read this user’s guide before installing, setting up, and using your new remote control.
-
Page 2: Table Of Contents
Contents Package contents ......................3 Features ..........................3 Install Batteries ......................... 3 Setup ..........................5 Brand Code Setup ..........................6 Auto Code Search ...........................7 Manual Code Search ........................8 Operation ......................... 9 Check Current Brand Code......................9 Lock Device ...........................10 Lock Volume and Mute .........................11 Copying Device Codes .........................11 Reset Your Universal Remote ......................12 Additional Information .................... -
Page 3: Package Contents
Package contents • Remote Control • User’s Guide • Code List Features • Operates up to four devices • Controls TV volume regardless of mode Install the batteries Remove the battery cover and insert two AAA batteries (not included), matching the polarity symbols (+ /–) marked inside. Replace the battery cover. Battery Notes: • Dispose of old batteries promptly and properly. Do not burn or bury them. - Page 4 G Turn on /off a selected device. Device Keys Select a device to control: TV; VCR/DVD; satellite/cable GUIDE Display the program guide (SAT/CBL); or AUX. for the selected device. MUTE Press to mute the sound. SLEEP Set the sleep timer for your CC Closed captioning.
-
Page 5: Setup
Setup Your universal remote can operate a TV, cable or satellite, VCR, DVD player, and external audio (AUX) device. Set up your universal remote in one of three ways: • Brand Code Setup: Directly enter the device code from the Code List. Try each code until you find one that works for your device. -
Page 6: Brand Code Setup
3. On your universal remote, press and hold SET, and then press a device key (TV, VCR/DVD, SAT/CBL, AUX). The device key lights up and stays lit, indicating that the remote is in setup mode. Release both buttons. Note: Do not hold down the keys for longer than 3 seconds or the remote enters auto search mode. 4. Enter the first 3-digit code for your device and brand. Pause briefly between each digit to make sure the remote receives all inputs. -
Page 7: Auto Code Search
Auto Code Search Auto Code Search automatically sends device codes to the device that you want to control. 1. Power on the device that you want to control. For VCRs and DVD players, you must insert a tape or disc. 2. On your universal remote, press and hold SET, then press and hold a device key (TV, VCR/DVD, SAT/CBL, AUX). -
Page 8: Manual Code Search
Manual Code Search Manual Code Search sends codes to the device you want to control one by one at the touch of the G button. 1. Power on the device that you want to control. For VCRs and DVD players, you must insert a tape or disc. -
Page 9: Operation
Notes: • During a search, you can press SET to change search direction from forward to backward or vice versa. • If no keys are pressed in 10 seconds, search stops. Operation Check Current Brand Code For future reference and to save time if you ever need to set up your remote again, retrieve and write down your device codes for each device key on your universal remote. -
Page 10: Lock Device
3. To check the second digit, press and hold SET, and then press 2. The device key will flash repeatedly to indicate the second digit. 4. To check the third digit, press and hold SET, and then press 3. The device key will flash repeatedly to indicate the third digit. -
Page 11: Lock Volume And Mute
Lock Volume and Mute You can lock the volume and mute functions so they work only with one device. For example, if you’ve locked the volume and mute functions to the TV device key on your universal remote, you can only control TV volume, even if you are in AUX or VCR/DVD modes. -
Page 12: Reset Your Universal Remote
3. Press the device key of the device you want to control (in our example, TV). This key lights and the device key from step 2 turns off. 4. Enter the new device’s 3-digit device code (in our example, the TV code). Pause briefly between each digit to make sure the remote receives all inputs. -
Page 13: Additional Information
Additional Information Troubleshooting Problem Solution I press SET and the appropriate Press and hold SET, then press the appropriate key. key at the same time, but the The remote will not enter the desired mode if buttons are remote still doesn’t work. pressed in the wrong order. - Page 14 Problem Solution I can’t get the remote to pair with • TVs and other devices may power off differently. Make my device. sure you know how yours powers off so you can press the appropriate key at the correct time. Otherwise, the remote will not pair with the device and you will have to try again. • Try all the 3 digital-device codes one by one under the same brand until all or most keys work properly. • Write down all the code numbers that work with your device, then try each until you find the best code.
-
Page 15: Specifications
• Consult your local RadioShack store or an experienced electronics technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your remote. Changes or modifications not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 16: Limited Warranty
Should a problem occur that is covered by this warranty, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor;... - Page 18 Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. ©2010. RadioShack Corporation. Printed 07A10 All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. in China 15-303...