RS Kameleon 8in1 UG
7/9/03
USING LEARNING (continued)
D
A
L
ELETING
LL
EARNED
S
M
PECIFIC
ODE
1. Press and hold P until the bottom IR segment
flashes twice. The program keys will appear:
2. Press IR DELETE once. The IR Delete
programming screen will appear:
3. Press a device key once (i.e., CBL, SAT, TV, DVD,
AUD, VCR, AUX, or CD) for the mode where
the learned keys to be deleted reside. The
selected device menu screen, including ,
will be displayed.
4. Press the same device key (as in step 3) once.
Upon deletion, the bottom IR segment will
flash twice as confirmation. The program keys
will appear again.
5. If desired, repeat steps 2 through 4 to delete
other learned keys from another mode.
6. Exit programming by pressing
display will return to the last-selected device
menu screen.
16 Using Learning/Changing Volume Lock
1:02 PM
Page 16
8-
-O
R
P
IN
NE
EMOTE
OWERED
CHANGING VOLUME LOCK
K
I
A
The RadioShack 8-in-One Remote is set at the
EYS
N
factory for independent volume control of each
selected device.
However, you may change the Volume Lock
setting to Global Volume Lock so that a device's
volume will be locked to one mode (e.g., to
control TV volume in all other modes). After
that, if desired, you can perform Individual
Volume Unlock on a selected device to set its
volume control for independent operation.
L
(G
1. Press and hold P until the bottom IR segment
2. Press VOL
once. The
3. Press a device key once (i.e., CBL, SAT, TV, DVD,
B
K
Y
AMELEON
V
C
T
OCKING
OLUME
ONTROL
V
L
)
LOBAL
OLUME
OCK
flashes twice. The program keys will appear:
once. TheVolume Lock
programming screen will appear:
AUD, VCR, AUX, or CD) where you want the
volume controls locked to. The bottom IR
segment will flash twice and the program
keys will appear again.
O
M
O
NE
ODE