Device Types; Setting Up Your Remote Control - Radio Shack 4-IN-1 REMOTE CONTROL Owner's Manual

15-1991.fm Page 6 Wednesday, October 20, 1999 10:37 AM
Note: Do not place objects on top of the re-
mote control after you have installed the batter-
ies. This can press keys for an extended period
of time and reduce the battery life.

DEVICE TYPES

You can use the remote control's device keys
to control the following types of devices:
— TVs
TV
— VCRs and TV/VCR combinations
VCR
— Cable converters, satellite systems
CBL
— CD Players, Home Automation
AUX
SETTING UP YOUR REMOTE
CONTROL
1. Refer to "Manufacturer Codes" on Page 14
and write down the codes for your brand of
device on the 4-in-One's label.
Note: Some manufacturers have several
codes listed. Try each until you find the
right one. See "If You Have Problems" on
Page 11 if you cannot find the correct
code.
2. Press the device key for the type of remote
you are replacing (
The red light blinks.
3. Hold down until the red light blinks twice,
P
then enter the 4-digit manufacturer's code.
For example, to replace a Panasonic TV's
remote control
0051), press , hold down
TV
light blinks twice, then press
When the red light blinks twice, the remote
control has accepted the code.
6
, , , or ).
TV VCR CBL AUX
(manufacturer's code
until the red
P
.
0 0 5 1