Indication Of Terminated Calls - Aastra 9480i User Manual

Indication of Terminated Calls

An Administrator can configure your phone to display a disconnected screen ("Call
Terminated") when the far-end hangs up. An audible busy signal is also heard on the phone. The
configuration of this feature can also include the maximum time interval that the busy signal is
audible. Contact your System Administrator for more information.
The following is the call terminated screen that displays on the 9480i if this feature is enabled on
your phone:
The following table identifies when a call terminated screen displays on the phone for different scenarios:
:
IF
1 line active and far-end disconnects,
2 or more lines active, and far-end
disconnects,
2 or more lines active, and a line NOT in
focus is disconnected by the far-end,
An incoming call comes in on the line in
focus that has a disconnected screen
displaying,
226
9480i
L1
Call Terminated
THEN
the line in focus:
• displays disconnected screen.
• plays busy tone.
• displays "Call Terminated" message on the screen.
the line not in focus:
• plays busy tone.
the line in focus:
• displays disconnected screen.
• plays busy tone.
• displays "Call Terminated" message on the screen for 5
seconds.
When 5 second times out:
• the busy tone stops
• the disconnected screen disappears.
• no busy tone plays
• no disconnected screen displays
• no "Call Terminated" message displays
the line in focus with no calls on hold:
• displays a ringing screen
the line in focus WITH calls on hold:
• flashes its' Line LED
Model 9480i IP Phone User Guide