Aastra 9480i User Manual page 182

Using CFWD via the IP Phone UI
Once CFWD is enabled on your phone, you can access and change the configuration using the
IP Phone UI or the Aastra Web UI. You can access the CFWD menus by pressing a
pre-configured Call Forward key, or by selecting Options->Call Forward from the IP Phone UI.
The following procedure assumes you have already configured a CFWD key AND assumes
there are three accounts configured on the phone.
CFWD in Account Mode
1. Use the RIGHT and LEFT arrow keys to scroll through each account.
In the above example, Screenname1, Screenname2, and Screenname3, are three accounts
configured on the phone. Screenname1 has "CFWD All" enabled, Screenname2 has
"CFWD Busy" enabled, and Screenname3 has CFWD disabled as indicated by no message
displayed.
2. Press the Call Forward key. The Call Forward Mode screen displays for the account you
selected. Use the UP and DOWN arrow keys to scroll through each state type.
176
Notes:
1. If there is no CFWD key configured on the phone or it is removed, you can still
enable CFWD via the IP Phone UI at the path Options->Call Forward.
2. If there is only one account configured on the phone, then the mode setting is
ignored and the phone behaves as if the mode was set to "Phone".
3. Using the Aastra Web UI, if you change the CFWD key mode to "Phone", all
accounts synchronize to the current setting of Account 1.
L1
Screenname1
CFWD All
Tues Jan1 10:00am
- Call Fwd
L2
Screenname2
CFWD Busy
Tues Jan1 10:00am
- Call Fwd
L3
Screenname3
Tues Jan1 10:00am
- Call Fwd
Model 9480i IP Phone User Guide