User Manual
Cordless Phones for MX-ONE™
6.2.3
Dial Using a Pre-programmed Navigation Key, Hot Key, Soft key, or Headset Button
A Navigation key
number. Press the pre-programmed key/button to dial the number. The call will automatically be
connected.
6.2.4
Dial a Number from the Call list
Tip: It is also possible to dial a number from the Call list by pressing
the list, and then press "Call" or
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Call list".
4
Select a number.
5
Press
dialled. Press "More" and select "Edit number". The 25 last received, dialled or missed
calls are stored in a call list. See
6.2.5
Dial Last Called Number with Headset Button
If a headset is used, it is possible to press its button
6.2.6
Dial the Sender of a Message
It is possible to call the sender of a message stored in the message list.
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Inbox".
4
Select message in the message list.
5
Press "View".
6
Press "More".
7
Select "Call sender".
6.2.7
Dial a Number from the Local Phonebook
1
Open the menu by pressing the "Menu" soft key.
2
Select
3
Select "Call contact".
4
Select contact from list, or search name/number by entering characters and select search.
5
Press "Call" or
6.2.8
Dial a Number from the Company Phonebook
1
Open the menu by pressing the "Menu" soft key.
2
Select
2.See
8.7 Short Cuts
on page 60 fore more information how to configure the key.
3.The headset button must be configured in the WinPDM.
1424-EN/LZT 103 089 A3 2012-02-23
2
1
1
, Hot key
, Soft key
, or a headset button
.
.
or the soft key "Call" to dial. The number can be edited before the call is
5.1 Calls
.
.
to make the call.
.
3
can be programmed with a
, selecting a number in
on page 23.
2
to dial the last called number.
31