Recovering A Password; Disabling Password Protection; Setting The Preemption Warning - Fujitsu series3-1621 User Giude

Basic operations
3.9.7.4

Recovering a password

Power cycle the appliance (this will take about 45 seconds)
At the "Free" prompt, press Print Screen.
The Authorize window appears.
Click the Forgot Password button at the bottom of the Authorize window.
The following information appears:
• A 16 digit HEX key (example -1234ABCDFFFF7890)
• The EID for the appliance (example - 123456-000001-1234)
• Instructions to contact FTS Customer Support
Keeping the Authorize window open
• Contact FTS Customer Support to request a single use, emergency password.
To obtain the emergency password, you will have to provide the 16 digit HEX
key and the EID for the appliance. FTS Customer Support will return a 16 digit
HEX emergency password.
• Enter the 16 digit HEX emergency password (case sensitive) in the Authorize
menu.
Utilizing the single use, emergency password will nullify the previous
password.
• Click OK.
The Main window appears, with password security now disabled.
You now have full access to the appliance via the OSCAR menu. You will have to
create a new password to re-enable security if desired.
3.9.7.5

Disabling password protection

Press Print Screen. The Main window opens.
Click Setup - Security. In the Password window, type the password and click OK.
Double-click the New field. Leave the field blank, and press Enter.
Double-click the Repeat field. Leave the field blank, and press Enter.
Click OK.
3.10

Setting the preemption warning

Administrators and users with certain access rights can preempt (disconnect) KVM
sessions and take control of the target device. You can choose whether or not to warn
the first user that the session will be preempted and specify how long the KVM s3-1621
appliance will wait for the first user to respond to the warning.
For more information about preempting sessions and preemption settings, see the KVM
s3 Client Installation and User's Guide .
Press Print Screen. The Main window opens.
Click Setup - Preempt.
Enter a number of seconds in the Timeout Seconds field.
• If you enter a value of 0 to 4 seconds, the first user will not be warned before
the session is preempted.
30
590-591-609D