Computer Terminal Operations; The Console Menu; Configuring Network Settings - Fujitsu series3-1621 User Giude

4

Computer terminal operations

4.1

The Console menu

Each KVM s3-1621 appliance can be configured at the appliance level through the
Console menu interface accessed through the configuration port on the rear panel of the
KVM s3-1621 appliance. All terminal commands are accessed through a terminal or
computer running terminal emulation software. This is not the best method for setting
options for the KVM s3-1621 appliance. The preferred method is to make all
configuration settings in the KVM s3 Client. See the KVM s3 Client User Guide for more
information.
4.1.1

Configuring network settings

When you turn on the KVM s3-1621 appliance, the switch initializes for approxi-
mately one minute. After it completes initialization, press any key on the terminal or
on the computer running the terminal emulation software to access the Console
menu interface. The terminal can be connected at any time, even when the KVM
s3-1621 appliance is already turned on.
The Console Main menu opens. Type 1 and press Enter for the Network configura-
tion option. The Network configuration menu opens.
Figure 26: Network configuration menu
Type 1 and press Enter to set the network speed. You should set the connection
manually without relying on the auto negotiate feature. After pressing Enter, you are
returned to the Network configuration menu. See Section 4.1.2 for more details.
Type 2 and press Enter to open the IP Configuration menu. Type the appropriate
number to select one of the following types of IP addresses: 1: None, 2: IPv4 Static,
590-591-609D
41