Mounting; Figure 3.2 Mounting Frame Structure - Fujitsu MHW2080AT Product Manual

3.2 Mounting

For information on mounting, see the "FUJITSU 2.5-INCH HDD INTEGRATION
GUIDANCE (C141-E144)."
(1) Orientation
The disk drives can be mounted in any direction.
(2) Frame
The MR head bias of the HDD disk enclosure (DE) is zero. The mounting frame
is connected to SG.
(3) Limitation of mounting
Note) These dimensions are recommended values; if it is not possible to satisfy
Bottom surface mounting
2
A
Frame of system
cabinet
3.0 or less
Details of A
C141-E250
Use M3 screw for the mounting screw and the screw length should
satisfy the specification in Figure 3.2.
The tightening torque must be 0.49N•m (5kgf•cm).
When attaching the HDD to the system frame, do not allow the
system frame to touch parts (cover and base) other than parts to
which the HDD is attached.
them, contact us.
2.5
DE
Screw
3.0 or less

Figure 3.2 Mounting frame structure

Side surface
2.5
mounting
2.5
PCA
Frame of system
cabinet
Screw
Details of B
3.2 Mounting
2.5
B
3-3