Commands Without Data Transfer - Fujitsu MHW2080AT Product Manual

Interface

5.4.3 Commands without data transfer

Execution of the following commands does not involve data transfer between the
host and the device.
•
RECABLIBRATE
•
READY VERIFY SECTOR(S) (EXT)
• SEEK
• EXECUTE DEVICE DIAGNOSTIC
• INITIALIZE DEVICE PARAMETERS
•
STANDBY IMMEDIATE
•
IDLE (UNLOAD) IMMEDIATE
•
STANDBY
•
IDLE
• CHECK POWER MODE
• SLEEP
•
SMART ENABLE/DISABLE AUTOSAVE
•
SMART EXECUTE OFFLINE IMMEDIATE
•
SMART ENABLE OPERATION
•
SMART DISABLE OPERATION
• SMART RETURN STATUS
• DEVICE CONFIGURATION RESTORE
• DEVICE CONFIGURAION FREEZE LOCK
•
SET MULTIPLE MODE
•
FLUSH CACHE (EXT)
•
SET FEATURES
•
SECURITY ERASE PREPARE
• SECURITY FREEZE LOCK
• READ NATIVE MAX ADDRESS (EXT)
•
SET MAX ADDRESS (EXT)
Figure 5.6 shows the protocol for the command execution without data transfer.
5-134 C141-E250