Security Set Password (X'f1'); Table 5.24 Contents Of Security Set Password Data; Table 5.25 Relationship Between Combination Of Identifier And Security Level, And Operation Of The Lock Function - Fujitsu MHW2080AT Product Manual

(29) SECURITY SET PASSWORD (X'F1')

This command enables a user password or master password to be set.
The host transfers the 512-byte data shown in Table 5.24 to the device. The
device determines the operation of the lock function according to the
specifications of the Identifier bit and Security level bit in the transferred data.
(Table 5.25)
Issuing this command in LOCKED MODE or FROZEN MODE returns the
Aborted Command error.

Table 5.24 Contents of SECURITY SET PASSWORD data

Word
1 to 16
18 to 255
Table 5.25 Relationship between combination of Identifier and Security level, and
operation of the lock function
Identifier
User
User
Master
C141-E250
0 Control word
Bit 0 Identifier
0 = Sets a user password.
1 = Sets a master password.
Bits 1 to 7 Reserved
Bit 8 Security level
0 = High
1 = Maximum
Bits 9 to 15 Reserved
Password (32 bytes)
17 Master password version number
(Valid is Bit 0=1)
Reserved
Level
High The specified password is saved as a new user password.
The lock function is enabled after the device is turned off
and then on. LOCKED MODE can be canceled using the
user password or the master password already set.
Maximum The specified password is saved as a new user password.
The lock function is enabled after the device is turned off
and then on. LOCKED MODE can be canceled using the
user password only. The master password already set
cannot cancel LOCKED MODE.
High or The specified password is saved as a new master password.
Maximum The lock function is not enabled.
Contents
Description
5.3 Host Commands
5-93