Installing An Ep46L; Ep55L; Before You Begin; Tools/Equipment List - Planar ep46L User Manual

Installing an ep46L/

ep55L

This section explains how to install an ep46L/ep55L. We suggest that you read the
entire section before you attempt to install the unit.

Before You Begin

Make sure you have all the items in these lists before you begin unpacking and
installing your ep46L/ep55L(s).

Tools/Equipment List

Depending on your installation, you may need one or more of the following items:

Other Things You May Need

• LCD screen cleaner or LCD wipes - available at most electronics stores
• At least two very strong people to help lift units into place

Plan Your Installation

You should have a detailed plan of how the units are to be configured. The plan
should include calculations for the following:

Prepare Your Installation Location

You should have prepared the area where you will install the unit. If custom
enclosures are part of the installation, they must be fully designed to accommodate
the installation of the displays, as well as the installed unit and ventilation and
cooling requirements.
• String/string level
• Digital/laser level
• Ladders/lift
• Back brace
• Stud finder (if hanging display on a wall)
• Power (maximum of five units per 20A circuit for 115V operation)
• Cable runs
• Ventilation and cooling requirements
• If hanging display on a wall, location of studs in the wall
ep46L/ep55L User Manual
Installing an ep46L/ ep55L
15