Enter a VLAN ID number in the first field and select GO to display the IGMP
Snooping Status window that you selected.
LACP Aggregator
The Link Aggregation Control Protocol (LACP) aggregator displays the status of
dynamic LACP trunked ports from the group point of view.
To view the LACP Aggregator Monitoring window, highlight LACP Aggregator in the
Network Monitoring menu and press Enter.
The information on this read-only window is described as follows:
Index The LACP Aggregator ID number.
Operation Key
Member Port
Status
Switch History
To view the switch history log, highlight Switch History from the Network
Monitoring menu and press Enter.
96
IBM BladeCenter 4-Port Gb Ethernet Switch Module: Installation and User's Guide
Displays the operational key used by the aggregator to communicate with
other aggregators.
Displays the port member status in the aggregator group.
Displays the status of each aggregator. When there is only one port
member in the aggregator, the aggregator acts as a normal individual port
(by default, each LACP-enabled port is assigned to its own aggregator
group). Otherwise, it will start to aggregate when there is more than one
port that wants to join the aggregator group.