IBM BladeCenter Installation And User Manual page 78

You can delete, add, and remove entries through this window. To delete an entry,
click the circle next to the appropriate entry; then, click Remove. To add an entry,
click Add and follow the instructions in this section. To modify an existing entry,
click Edit and follow the instructions in this section.
The following information pertains to the Setup User Account - Add window and the
Setup User Account - Edit window that are illustrated in this section.
v To add a user account, fill in the appropriate information in the User Name, New
v The information on these windows is described as follows:
60
IBM BladeCenter 4-Port Gb Ethernet Switch Module: Installation and User's Guide
Password, and Confirm New Password fields. Then, select the desired access
level, <Root>, <User>, or <User+>, in the Access Level control and click
Apply.
User Name
Enter a user name in this field.
New Password
Enter the desired new password in this field.
Confirm New Password
Enter the new password a second time.
Access Level
Displays the current access level assigned to each corresponding user.
There are three access levels: <User>, <User+>, and <Root>. A <Root>
user has full read/write access, while a <User> has read only access. A
<User+> has the same privileges as a <User>, but with the added ability
to restart the switch.