802.1Q Vlans Entry Settings -- Add - IBM BladeCenter Installation And User Manual

You can delete, add, and remove entries through this window. To delete an entry,
click the circle next to the appropriate entry; then, click Remove. To add an entry,
click Add and follow the instructions in "802.1Q VLANs Entry Settings -- Add". To
modify an existing entry, click Edit and follow the instructions in "802.1Q VLANs
Entry Settings -- Edit" on page 42.

802.1Q VLANs Entry Settings -- Add

Complete the following steps to display the 802.1Q VLANs Entry Settings -- Add
window:
1. Select VLANs from the Configuration menu (see "Configuration" on page 34).
2. Select Edit 802.1Q VLANs from the VLANs menu.
3. Click Add on the Edit 802.1Q VLANs window.
A window similar to the following opens:
To add an entry, enter the appropriate information in the preceding window. Click
Apply to make the changes effective.
To configure an 802.1Q static VLAN entry, select the desired VLAN ID number in
the first field and then enter a VLAN name in the second field. Next, either check
the Tag option, or leave it unchecked if you do not want a member port to be a
Tagging port. In the last two rows, check None if you do not want a port to belong
41
Chapter 5. Web-Based network management