2.5Mm Audio Connector On Phone - Polycom IP 7000 User Manual

• Audio connectors and ports on the Multi-Interface Module—to connect
wireless (lapel) microphones, speakers, and recording devices and
computers (to record phone calls).
To connect audio components to the Multi-Interface Module, see your
system administrator.
After you connect an auxiliary audio component to the Multi-Interface
Module, you must enable the component. To enable the component, see
Enabling Auxiliary Audio Components
Note You do not have to enable audio from a mobile phone or from a computer calling
application. This audio is automatically enabled when you connect the
Mobile Phone Cable or the Computer Calling Cable to the 2.5mm audio connector
on your conference phone.

2.5mm Audio Connector on Phone

Your conference phone has a 2.5mm audio connector to connect to a mobile
phone or to a computer calling application. You connect a mobile phone so
you can use the conference phone speaker to hear mobile phone calls. You
connect a computer to stream two-way audio from computer calling
applications for hands-free conversations. The 2.5mm audio connector is
located on the right side of your conference phone, behind a door you flip
open.
The following figure shows the 2.5mm audio connector behind the door on the
side of the conference phone. The 2.5mm audio connector has a mobile phone
icon above it.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
Getting Started with Your Phone
on page 2-13.
1 - 9