Replacing The Local Service Display - Fujitsu PRIMERGY RX600 S6 Service Supplement Manual

Replacement routines
4.2

Replacing the local service display

Ê Open the server as described in section "Opening the server" on page 21.
Ê Remove the memory board in slot #8 and the respective memory divider.
Removing the local service display
Figure 5: Location of the release button for the local service display
Ê Press the release button (see arrow in figure above) in order to pull out the
local service display.
Figure 6: Pulling the local service display out of its bay
Ê Pull the local service display out of its bay (while pressing the release button).
24 Service Supplement
RX600 S6