Russell Hobbs 14449 Instructions Manual page 7

20 Replace the seal round the blade unit.
21 Replace the blade unit in the bottom of the jug.
22 Turn the blade unit anti-clockwise to tighten it, it's a
bayonet-type fitting.
connection
This product doesn't need an earth. Use a 13A
BS1362 fuse in a 13A BS1363 plug. Fit the blue
wire to N, and the brown wire to L. Fit the cord
grip. If in doubt, call an electrician. Don't use a
non-rewireable plug unless the fuse cover is
fitted. If you remove the plug, dispose of it.
7